1. Home
  2. >
  3. Car & Truck Parts
  4. >
  5. Accessories
  6. >
  7. Zone Offroad D28N 6" Suspension Lift Kit
d28n.jpg

Zone Offroad D28N 6" Suspension Lift Kit

Product Information

  • Brand Name
    Zone Offroad
  • Part Number
    D28N
  • APIN
    ZGDmZmNjZQM4
  • Condition
    New
  • Lowest Price
  • Free Shipping
  • Free Return
$1,285.46 

Only 100 left - order soon

Description

This new Zone Offroad 6" suspension system for the 2003-2007 Dodge Ram 2500 is performance packed and budget friendly for those looking to get 37" tires under their HD Dodge truck. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4" steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. Stock control arm angles are maintained to provide a great ride, handling and control.In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is available also for trucks featuring a stock 2-piece rear driveshaft.

Item Specifications

  • Part Number:D28N
  • UPC:555132146913294898624391
  • Weight:100.00
  • Brand:Zone Offroad
  • Features:
    • Unique upper and lower control arm relocation bracket design.
    • Heavy 1/4" steel construction.
    • No cutting of the frame required.
    • High performance at a low price.
  • California Proposition 65 Warning:No
Important Notes :
  • 2-piece rear driveshaft requires carrier bearing drop kit D5505
  • Will not fit dually applications
  • Rear axle diameter will be 3.5" or 4", measure before ordering
  • Minor trimming may be required with some tire/wheel combinations. A front bumper spacer kit (D5801) is available to gain clearance if necessary
  • If driveline vibration is present, some 6" kits may require the transfer case indexing kit (D5805). See installation instructions (step 17) for fitment details.
  • Will work with Power Wagon models with the addition of sway bar link kit D5301. Power Wagon models came factory with a 2" taller ride height so net lift gain will be 4" over stock.
  • Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring
  • Install Time Hrs: 6-8
  • ATTN State of California Consumers warning: Cancer and Reproductive Harm www.p65warning.ca.gov

Reviews

0 Out of 5
  • (0)
  • (0)
  • (0)
  • (0)
  • (0)

    Questions & Answers ()

    0 Answered Questions
    Copyright © 2025 AutoParts4less